Papiermaschinen
Hauptbild | Name | Hersteller | Typ | Größe | Kapazität |
---|---|---|---|---|---|
— | Papiermaschine für Fluting 2500 mm |
Asian | Foundrinier | 2500 mm | 120 t/day |
1 verfügbar |
Papiermaschine, 200 tato, grafische Papiere, BeloitManufacturer:Beloit Manufacturing year: 1970's GSM: 32-74g/m2 Production capacity: 200ton/day Product: Printing Paper B,C,D / Information Paper/ Newspaper Paper Design speed: 1100m/min Operation speed: 945m/min |
Beloit | — | — | 200t/d |
— | Tissuemaschine 2200mmNeue Tissuemaschine 2200mm: it consists of technological line for production Tissue paper with capacity 20 T/D from 100 % virgin pulp and one Tissue machine working width 2,2 m capacity 10 T/D. |
China | — | — | 10t/d |
1 verfügbar |
Papiermaschine für Fluting und Testliner 2800 mmGebrauchte Papiermaschine für Fluting und Testliner 2800 mm beschnittene Arbeitsbreite 200 t/24 h Kapazität Mit Konstantteil Verkauf ohne Stoffaufbereitung, diese kann separat geliefert werden. |
European | Fourdriner | 2800 mm net width | 200 t/day |
— | European Crescent Tissue Paper Machine with stock preparationInstalled but never used crescent paper machine with stock preparation Manufacturer: Europan Produced Paper: Tissue, facial, kitchen raw paper Design speed: 1900m/min Basis weight: 12-25g/m² Capacity: ca 200 t/day
|
European | — | — | 208 t/d |
1 verfügbar |
Pappenmaschine 2850 mmGrey millboard production machine
|
European | Cylinder mould | 2850 mm | 36 t/ 24 h |
1 verfügbar |
Fourdriner board production machine 2240 mmThree layer board (top/middle/bottom) |
European | Fourdriner | 2240 mm trimmed with | 70 - 200 m/min |
1 verfügbar |
Paper production line for grapic papers with stock preparation 450 t/day- Stock preparation system for waste paper, vacuum system, heat recovery and bleaching line are included! - Fourdrinier paper machine - 2 Prewinders |
European | Fourdriner | 5 - 6 m | 450 t/day |
1 verfügbar |
Corrugating Board Paper (or Kraft paper) Mill+ Stock PreparationPaper: Kraft (or Corrugating Medium, Test Liner Paper) Basis weight: 31-100 GSM (or 220GSM) Maximum paper width: 6520 mm Production capacity: 400 ton/day Design speed: 1,110 m/min Nominal speed: 400~800mm/min Slight motion speed: 10~60mm/min (At sequence, operation monitoring settings possible) Leveling speed: 100~999.9m/min (At sequence, operation monitoring settings possible) Rate of change per second: 0.1~1m/min/sec (slow speed) 1~5m/min/sec (rapid speed) Change time settings: 10%/200 seconds (10% change time can be set) Coating in size press: max. 1g/m2 (double-side) Reel winding length: 74m Reel winding maximum diameter: 2600mm The number of machine sections: 12 sections The number of motors: 42units (Manufacturing year: 2004) Manufacturing year of electric equipment: 2004
|
Metso / Beloit / Mitsubishi | Twin wire (or four wires) | 6520 mm | 400 t/d |
1 verfügbar |
Kraft Paper Mill 3350mm - AsiaUsed 3350mm Kraft Paper Mill Manufacturer: Mitsubishi Stopped year: Feb. 2023 Product: Kraft paper, one glossed paper GSM: 30-180g/㎡ Production capacity: 100ton/day Final Product Width: 3350mm Design speed: 150-550m/min Operation speed: 390m/min
Head box Manufacturer: Hitachi Width direction adjustment device: CP
Wire part Manufacturer: Mitsubishi Wire width: 3710mm Fourdrinier type Dandy roll
Press part Manufacturer: Mitsubishi 1P: twin bar press, linear pressure: 45N/mm 2P: twin bar press, linear pressure: 80N/mm 3P: straight through press, linear pressure: 90N/mm Sheet moisture in outlet of press: 60% The number of cylinders in Pre-dryer : ∅1524mm x 10units There are no size press and coater The number of cylinders in after-dryer: Yankee ∅4572mm x 1unit
Steam pressure Main steam pressure (inlet of dryer): low 0.3/Medium 0.7MPa Mean steam pressure (pre-dryer): 0.2MPa Mean steam pressure (after dryer): Yankee 0.35MPa
Dryer hood Manufacturer: Mitsubishi Dew point: 35g 56°C, 120g 61°C There is no calendar
Reel part Manufacturer: Mitsubishi Secondary arm type Maximum diameter of reel: ∅1800m
Winder Manufacturer: Mitsubishi Two drum type The number of slitters: 8 units
Quality control system: BM The number of scanner: 1unit Measuring sensor: GSM, moisture Flow direction control system: seed valve, steam pressure Width direction control system: CP Profile control actuator: CP valve Defect detector
Sheet inspection system Defect detector Manufacturer: OMRON
Drive system Manufacturer: Toshiba Manufacturing year: 1990’s DC 400V, 440V |
Mitsubishi | Kraft Paper Mill | 3350 mm | 100 t/d |