Cerutti Laminator/Coater

• Wet (waterbased) or dry Lamination (waterbased or solvent based)

• Lens/holographic optima register system – Weko re-wetting system

• Metpol/aluminium foil/transmet

• Two gravure heads  - 1^st head for the adhesive & 2^nd head usually applies the lacquer if required (waterbased or solvent based)

• Two rewinds – one for laminate and one for stripped film on transmet

• 1240mm max substrate – board/paper

• 1.5m max OD

• 1.0m max OD topstrate – film/foil etc

Can use 76mm core on board unwind also (only laminator that can)

Drying Systems – Hot Oil Drying on both Cerutti Laminator/Coaters 

Kroenert Laminator

• Wet Lamination only (waterbased)

• Metpol/foil – not currently transmet

• Workhorse for drinks market

• Roller coating (rubber & steel) for adhesive and gravure for lacquer

• Clear lacquers only (not golds)

• One rewind though has an additional in-house rewind added also

• 1229mm max substrate – board/paper

• 1800mm max OD

1.0m max OD topstrate – film/foil etc

SLITTERS

WICKELTECHNIK - Jumbo Slitter

• Max slit width – 1250mm

• Min slit width – 300mm

• Board Thickness  Min 60 microns  Max 800 microns

• Max reel OD – 1800mm

• Max reel OD  - 1800mm

• Slit width min. 500mm

• Slit width  max. 1250mm

• Lens/Holographic registration monitoring capability for reels

• 152, 302 & 305mm cores sizes

• Used for board mainly

Atlas Slitter

• Max slit width – 1250

• Min slit width – 300mm

• Max reel OD – 1800mm

• Max rewind dia – 1800mm

• Core sizes 152, 302 & 305mm

• Used for board mainly

• Rewind min slit width 350mm

• Rewind max slit width 1050 mm

WICKELTECHNIK Coiler (Bobbins)

• Max slit width – 1250mm

Min slit width – 455mm

• Max OD – 1800mm

• Smaller cores sizes – 76,152  302 and 305mm

• Min slit width – 65mm

• Has film stripping capability – used for a lot of paper film stripping

Splitter

• Widest slit width

• Has film stripping capability – used for some paper film stripping

• Used for slitting PET film also

• Has corona treatment capability

Sheeters & Guillotine

Valmet - sheeter

• Max input width – 1450mm

• Min input width – 260mm

• Max reel input OD – 1800mm

• Core sizes  -  152, 302 and 305mm

• Min and max sheet chop length – 400 to 1500mm

• Min and max sheet widths – 250 to 1300mm

• Max pallet height 1520mm

• Flying Splice System

SHM (Strachan Henshaw) - Sheeter

• Max input width – 1170mm

• Max reel input OD – 1800mm

• Pallet height – 1700mm

• Min and max sheet chop length – 550 to 1500mm

• Min and max sheet widths – 250 to 1170mm

Guillotine Schneider

• Max output sheet size of 1080 x 1250mm

Min trim 2mm