Verkaufsliste für Papierproduktions­maschinen
Verkaufsliste für Papierverarbeitungs­maschinen

PM Karton

Gebrauchte Papiermaschinen zur Herstellung von Karton, Pappe, Papierboard, Wellpappe und Containerboard.

Hauptbild Name Hersteller Typ Größe Kapazität
—

Wickelkartonmaschine

 Used Multi-layer Paperboard Winding Machine

Speed max: ca 85m/min

Board thickness: 1 – 5 mm

Grammage range: Grammage max ca 3500 GSM

 

Consiting of     

Appoach flow system

Stainless steel chest

Refiner

Deflaker

Vibrating screen 0,7 m²

Pressure screen

Board machine

Wet section recently rebuilt in stainless steel version

Circular distributor

2 cylinder mould

Winding cylinder

Dryer channel – Steam driven with heat exchanger

Sheet cutter

 European Used Multi-layer Paperboard Winding Machine — 80 m/min
—

Paper and board machine for 2500mm, up to 350GSM

Parameter Details
Total Running Hours Approx. 3 years maximum
Paper Formation 6 sets Ultra Formers cylinder (Ø 1,866 mm × L 2,550 mm)
Maximum Trim Width 2,500 mm roll width
Type of Paper Produced Linear board kraft, multi-layer sack kraft paper
Number of Presses 3 sets
Number of Dryers 50 pieces (Ø 1,860 mm × L 2,650 mm)
Number of Canvas Dryers 12 pieces (Ø 1,220 mm × L 2,650 mm)
Calendaring Units (Main Machine) 2 sets × 7-roller stack
Coating Facility Inline with paper machine; 1 unit coating machine
Calendaring (Coating Machine) 1 set of 7-roller stack
Rewinding (Coating Machine) Double decker rotary type rewinders
Rewinding (Paper Machine) Pope Reel rewinder
Sheeting Duplex sheeters and cutters
Roll Cutting & Rewinding 1 unit roll-cutter and rewinder
— upto 350 GSM 2500mm at reel 100 Tons per day
1 verfügbar

Pappenmaschine 2850 mm

Grey millboard production machine


Grammage range: 1000 - 2000 GSM
Width: 2850 mm
Capacity: 36 t/day


Consisting of
Approach flow system:
1 Voith size 10 pressure screen
1 Finkh vibrating screen
1 Andritz Mixing pump


Board machine:
2 cylinder mould
Coutch roll


Forming section with:
Forming roll: 1500 mm diameter
Pre press roll: 350 mm diameter
Breast roll: 460 mm diameter
Complete with drive, spare rolls


General refurbishment: 1991
Refurbishment: year 2007, Renewing of cylinder mould with couch roll,
Installation of Siemens S7, Framing in stainless steel
Octopus distributor in stainless steel.
Table, working width 3.000 mm
Length: 6.000 mm


Table
Working width: 3.000 mm
Length: 7.000 mm
With guide roll and embossing calander


Table
Working width: 3.000 mm
Length: 5.500 mm


Length cutting unit
Working width: 4.00 mm
Length: 2.500 mm
With water jet cutting


Steam - Flat dryer
Made by: Schilde
Transport with chains
Working width: 4.800 mm
Dryer length: 18.000 mm
With ventilators
Refurbished: 2008


Table
Working width: 4.800 mm
Length: 3.000 mm
Refurbished: 2007


Gas Dryer
Heating power: 1.400 kW
Made by: Dornier
Working width: 4.00mm
Dryer length: 14.000 mm
With heat exchange and heat recovery
Year: 2007


Flat dryer
Hot air drying
Made by: BSH
Working width: 4.800 mm
Length: 25.000 mm
With 5 Drying chambers
Gas burner Ventilators
Heat recovery
Refurbished: 2008


Table
Length cutting device
Made by: Schohr
Year: 1973


2 Hydraulical layboys
 

 European Cylinder mould 2850 mm 36 t/ 24 h