PM Grafisches- / Verpackungspapier
| Hauptbild | Name | Hersteller | Typ | Größe | Kapazität | |
|---|---|---|---|---|---|---|
1 verfügbar |
Kraft Paper Mill 3350mm - AsiaUsed 3350mm Kraft Paper Mill Manufacturer: Mitsubishi Stopped year: Feb. 2023 Product: Kraft paper, one glossed paper GSM: 30-180g/㎡ Production capacity: 100ton/day Final Product Width: 3350mm Design speed: 150-550m/min Operation speed: 390m/min
Head box Manufacturer: Hitachi Width direction adjustment device: CP
Wire part Manufacturer: Mitsubishi Wire width: 3710mm Fourdrinier type Dandy roll
Press part Manufacturer: Mitsubishi 1P: twin bar press, linear pressure: 45N/mm 2P: twin bar press, linear pressure: 80N/mm 3P: straight through press, linear pressure: 90N/mm Sheet moisture in outlet of press: 60% The number of cylinders in Pre-dryer : ∅1524mm x 10units There are no size press and coater The number of cylinders in after-dryer: Yankee ∅4572mm x 1unit
Steam pressure Main steam pressure (inlet of dryer): low 0.3/Medium 0.7MPa Mean steam pressure (pre-dryer): 0.2MPa Mean steam pressure (after dryer): Yankee 0.35MPa
Dryer hood Manufacturer: Mitsubishi Dew point: 35g 56°C, 120g 61°C There is no calendar
Reel part Manufacturer: Mitsubishi Secondary arm type Maximum diameter of reel: ∅1800m
Winder Manufacturer: Mitsubishi Two drum type The number of slitters: 8 units
Quality control system: BM The number of scanner: 1unit Measuring sensor: GSM, moisture Flow direction control system: seed valve, steam pressure Width direction control system: CP Profile control actuator: CP valve Defect detector
Sheet inspection system Defect detector Manufacturer: OMRON
Drive system Manufacturer: Toshiba Manufacturing year: 1990’s DC 400V, 440V |
Mitsubishi | Kraft Paper Mill | 3350 mm | 100 t/d | |
| — | Papermaschine für graphische Papiere |
Valmet | Paper machine for graphical paper | 8350 mm | 1500 m/min | |
1 verfügbar |
Corrugating Board Paper (or Kraft paper) Mill+ Stock PreparationPaper: Kraft (or Corrugating Medium, Test Liner Paper) Basis weight: 31-100 GSM (or 220GSM) Maximum paper width: 6520 mm Production capacity: 400 ton/day Design speed: 1,110 m/min Nominal speed: 400~800mm/min Slight motion speed: 10~60mm/min (At sequence, operation monitoring settings possible) Leveling speed: 100~999.9m/min (At sequence, operation monitoring settings possible) Rate of change per second: 0.1~1m/min/sec (slow speed) 1~5m/min/sec (rapid speed) Change time settings: 10%/200 seconds (10% change time can be set) Coating in size press: max. 1g/m2 (double-side) Reel winding length: 74m Reel winding maximum diameter: 2600mm The number of machine sections: 12 sections The number of motors: 42units (Manufacturing year: 2004) Manufacturing year of electric equipment: 2004
|
Metso / Beloit / Mitsubishi | Twin wire (or four wires) | 6520 mm | 400 t/d | |
1 verfügbar |
Paper machine 2550 mmmachine width: 2550mm Max. speed: 200 m/min BW range: 30-400grs/m² Supply voltage: 3 x 500 Volts Steam pressure: 4 bar Air pressure: 7 bar Water pressure: 2 bar Water consumption: 40 Lts/Kg Steam consumption: 3.0 Kg/kg PM only from headbox to pope-roll.
MACHINE DESCRIPTION Has produced a wide range of products: Production range is from 30 to 400 GSM running at 50 to 220 m/min. Paper with at reel is 2550 mm max. Capacity is up to 3500 Kg/h. Main characteristics is its formation uniformity CM and MD, gradual drying rate both wet and steam dried. GENERAL DESCRIPTION FORMING SECTION WITH DANDY ROLL It is a Fourdrinier type with removable table for wire change, cantilever couch roll, closed headbox for optimal flow rate at any speed and watermarking Dandy Roll. PRESSES Three 80 kg /cm2 presses, 2 lower felt and a 3rd upper felt, allowing good drying capacity and surface smoothing. Water content after presses is about 50% below 120 GSM. DRYING Consist in a main battery of 18 driers of 1250 mm diameter, in 3 drive sections with drying felts on both sides. Post drying after size press is done with 6 driers, 4 of 1000mm dia and 2 1250mm diameter in one drive section, with automatic paper moisture control. All driers tested at 4 Bar, heated with steam at 3.7 Bars max. All sections covered by a recovery heat hood that allows pocket ventilation at 90 degrees Celcius. SIZE PRESS Two rubber 350 mm diameter rolls working at 20 Kg/cm allows sizing with starch and latex. CALENDER STACK Küsters 400mm dia King roll, 2 intermediate 330mm dia rolls and un upper 400mm dia Queen roll that can be used as a one pass or three pass calender up to 80 Kg/cm. MACHINE DRIVE It is a line shaft with conical pulleys, pneumatic clutch and angular reducer for 11 sections. Motor drive is 300 Kw dc. SECURITY PAPER MACHINE
|
— | — | 2550mm | 3,5 t/h | |
| — | Paper machine for fluting paper 2550 mm, 200 t/daySecond hand paper machine for fluting paper Deckle/ pope reel width: 2550 mm GSM range: 80 – 250 GSM Speed: 800 m/min Capacity: 200 t /24 h Refurbished: 2016 – 2017
Consisting of: Approach flow system Included Headbox: 2 / Comer Wire: Twin wire Press section: Binip press with suction roll Jumbo Press Drying section: 32 dryers / 5 bar Size press: Included Calendar: Voith / Küsters Hood: New Forbes Marshal steam & condensate with heat recovery
Drive: AC silent drive Rewinder: Included Voltage: 380 V Stock preparation: Included Water treatment: Krofta Sedicell and Algas filters
PARTLY DISMANTLED |
— | — | 2550 mm | 200 t/day | |
1 verfügbar |
Papiermaschine, 200 tato, grafische Papiere, BeloitManufacturer:Beloit Manufacturing year: 1970's GSM: 32-74g/m2 Production capacity: 200ton/day Product: Printing Paper B,C,D / Information Paper/ Newspaper Paper Design speed: 1100m/min Operation speed: 945m/min |
Beloit | — | — | 200t/d | |
1 verfügbar |
Kraftliner Karton Papiermaschine 2950 mmKraftliner paper machine 2950 mm Basis Weight: 170 g/m² - 500 g/m² Machine speed: 120 m/min (200 g/m²) Paper Width: 2,950 mm Capacity: 100 tpd
|
— | — | 2950 mm | 100 tpd | |
| — | Two wire paper machineTwo wire paper machine for sale. Width over 4000 mm Double ply paper machine, with 2 fourdriniers and headboxes. Currently producing brown paper for containerboard: • 50% High Performance Fluting • 5% Waste Based Fluting • 30% Test Liner 1 • 15% Test Liner 3 With a weight range between 115 and 200 gsm The following are the main PM characteristics for PM • Operating speed up to 720 m/min • Max drive speed 750 m/min • Design speed dryer section 1000 m/min • Max saleable width after rewinder 4640 m/min |
European | — | over 4000 mm | — |
