Papiermaschinen

Test Liner and Corrugated Medium Paper machine

Basis Weight             : 90 ～ 200 g/㎡

Paper Width              : 1). 3,850 mm at Winder Trim

Working Speed          : 450 m/min with 175 g/㎡.

 Production Capacity : 436MT/Day on 100% Efficiency bases on 175 g/㎡

Gebrauchte Langsieb Papiermaschine

Antriebe 60 Hz! 

Trim width: 2500 mm

Working speed: 150 - 350 m/min

Design speed: 400 m/min

Capacity: 120 t/d

Basis weight: 90 - 215 gsm

Drive: sectional drive BYDC and AC motor, belt pulley and reducer

Used 3270mm Kraft Paper Mill

Manufacturer: Mitsubishi

Final Remodeling year: 1990’sSecond hand

Final Product width: 3270mm

GSM: 40-140g/㎡

Production capacity: 200ton/day

Twin wire type

Design speed: 1000m/min

Operation speed: 706m/min

Head box

Manufacturer: Sumitomo

Seam former–MB type

Width direction adjustment device: delusion 

Twin Wire part

Manufacturer: Mitsubishi

Wire width: 3750mm

Fourdrinier type Dandy roll

Press part

Manufacturer: Mitsubishi

1P: twin bar press, linear pressure:  48N/mm

2P: twin bar press, linear pressure:  60.7N/mm

3P: straight through press, linear pressure:  88.2N/mm

Sheet moisture in outlet of press: 50~55%

The number of cylinders in Pre-dryer : ∅1524mm x 41units

Size press and coater

Manufacturer: Mitsubishi

Gate roll size press type

Coating weight: 0.1~2.5 BD g/m2

The number of cylinders in after-dryer : ∅1524mm x 12units

Steam pressure

Main steam pressure (inlet of dryer): 0.3MPa

Mean steam pressure (pre-dryer): 0.18~0.23MPa

Mean steam pressure (after dryer): 0.11~0.18MPa

Dryer hood

Manufacturer: Evara

Dew point: 35g 56°C, 120g 61°C

Calendar

Yodogawa

The number of rolls: 2+3

Maximum linear pressure: 120KN/m

Reel part

Manufacturer: Mitsubishi

Secondary arm surface type

Maximum diameter of reel: ∅2400m

Winder

Manufacturer: Mitsubishi

Shaft-less two drum winder

The number of slitters: 6 units

Quality control system: BM

The number of scanner: 1unit

Measuring sensor: GSM, moisture, color, carriper

Flow direction control system: seed valve, steam pressure

Width direction control system: CP

Profile control actuator: CP valve

Defect detector

Sheet inspection system

Defect detector

Manufacturer: OMRON

Process automation system

Manufacturer: Valmet

Drive system

Manufacturer: Toshiba

Year: 1990‘s

AC 420V

Paper: Kraft (or Corrugating Medium, Test Liner Paper)

Basis weight: 31-100 GSM (or 220GSM)

Maximum paper width: 6520 mm

Production capacity: 400 ton/day

Design speed: 1,110 m/min

Nominal speed: 400~800mm/min

Slight motion speed: 10~60mm/min

(At sequence, operation monitoring settings possible)

Leveling speed: 100~999.9m/min

(At sequence, operation monitoring settings possible)

Rate of change per second:

0.1~1m/min/sec (slow speed)

1~5m/min/sec (rapid speed)

Change time settings: 10%/200 seconds (10% change time can be set)

Coating in size press: max. 1g/m2 (double-side)

Reel winding length: 74m

Reel winding maximum diameter: 2600mm

The number of machine sections: 12 sections

The number of motors: 42units (Manufacturing year: 2004)

Manufacturing year of electric equipment: 2004

General information:

Paper machine
Maximum performance with which the machine worked with sheet width 2060 [mm]

Capacity: 39 [ton / day]

Productioon speed: 360 - 400 [m / min] depending on grammage

The range of basis weights produced 30 - 60 gsm

Width of the sheet  after headbox 2200 [mm].

With waste paper stock preparation

- Pulper 15 m³ with feeding conveyor

- Pulper discharge machine and first sorter

- Hett separator with vibrating screen

- Lamort ADS 5 pressure screen

- Pressure screen made by Nelba

- Lamort CH 3 pressure screen

 - Maule Kneater with a capacity of 60 t/day

- Krofta Clarifier

- Voith HD cleaner

- Chest with 5 m³  volume