Verkaufsliste für Papierproduktions­maschinen
Verkaufsliste für Papierverarbeitungs­maschinen

Verkaufsliste

Hauptbild Name Hersteller Typ Größe Kapazität
—

Zellstoffschneckenpresse von Andritz SCP755LM

Diam: 755 mm

With gear box ratio 35,5 and AC motor excluded

 Andritz SCP755LM — 250 TPD
1 verfügbar

Voith writing and printing paper machine 5300 mm

Voith writing and printing paper machine with Tri Nip Press, which is designed to make from 30 to 130 gsm, with speed of 800 mpm.
Headbox slice width is 5300 mm, 
Wire width is 5400 mm
Press rolls width is 5300 mm
48 Dryers 1500mm OD 5325 mm face 
Size press Roll 5200 mm face width
Pope reel is 5400 mm face width
Jagenber Vari Dur Rewinder with 10 Tambour rolls.
 Voith — 5300 mm 250 tpd
1 verfügbar

Rotationsrollen Umroller 1400 mm

Rotationsrollen – Umroller

Sonderanfertigung

Wilky & Abelsmann GmbH / PVM - Düsseldorf

Baujahr: 1980

Maximale Arbeitsbreite: 150 cm

Maximaler Abwicklungsdurchmesser: 140 cm

Maximaler Aufwicklungsdurchmesser: 140 cm

Hydraulische Abrollung mit

pneumatischer Scheibenbremse

pneumatische Messer

maximale Geschwindigkeit 250lfm/min

Achslose Abwicklung mit Rollenhebung ,

Krahn für Abwicklung.

 Wilky & Abelsmann GmbH / PVM - Düsseldorf floor pick up - shaftless 1400 mm 250 m/min
—

Vakuumpumpe Rietschle CLFEH 250 m³/h - 10 mbar

 Rietschle CLFEH — 250 m³/h - 10 mbar
1 verfügbar

Drum Refiner Andritz Papillon CS 380

Refiner:

type: Papillon CS 380

manufacturer: Andritz

RPM: 700- 1400 U/min
Flow: 400- 1200 l/min
Capacity max. 2500 kg/h
Outlet pressure max. : 5,5 bar pine
Stock consistency: 3,8%
Power max. : 300 kW

Gentle fiber treatment with low energy consumption

Features and benefits:

Reduced energy consumption due to low no-load power
- Constant fiber properties
- Even gap inside the whole refining area
- Wide range of refiner fillings tailored to the repsective type of fiber
- Shortest possible down-time due to excellent and comfortable access to all stator plates and the cylinder

 Andritz Papillon CS 380 — 2500 kg/h
1 verfügbar

TMP Refiner Sunds Defibrator RGP 42 with plug screw

High consistency Refining line made by Sunds Defibrator 

 

Rotating speed: 1000 - 2400 rpm

Preheater and refiner pressurized separately

Design pressure: 1000 kPa (10 bar)

Max. production rate: 1000 kg/h

Drives: Feeding 1350 kW and loading 640 kW (ABB)

Many different refining plates available

 Sunds RGP 42 — 24 t/day
—

Rollenverpackungsanlage Lamb 1800 mm breit

Max. Rollendurchmesser  1,45 m
20 Rollen pro Stunde Kapazität
Betrieb mit  1 Mann ist möglich
max  Rollenbreite 1,8 m
 

 Lamb — 1800 mm width max 20 Rolls per hour
—

Hydraulic Headbox 3229 mm

Stock cons.: 0,35 - 0,8 % 

Retention wire: ca 82% 

Grammage range: 38 - 250 GSM 

Wire width: Outlet width: 3229 mm 

 

Dilution water distributor

Number of dilution zones: 95

 German manufacturer — Outlet width: 3.229 mm 20.500 - 36.800 l/min
—

Paper machine for fluting paper 2550 mm, 200 t/day

Second hand paper machine for fluting paper

Deckle/ pope reel width:                      2550 mm

GSM range:                           80 – 250 GSM

Speed:                                    800 m/min

Capacity:                                200  t /24 h

Refurbished:                          2016 – 2017

 

Consisting of:

Approach flow system           Included

Headbox:                               2  / Comer

Wire:                                       Twin wire       

Press section:                        Binip press with suction roll Jumbo Press    

Drying section:                       32 dryers / 5 bar

Size press:                             Included

Calendar:                               Voith / Küsters

Hood:                                     New Forbes Marshal steam & condensate with heat recovery

Pope reeler:                           Fully automatic with stackers 10 reel spools

 

Drive:                                     AC silent drive

Rewinder:                               Included

Voltage:                                  380 V

Stock preparation:                 Included

Water treatment:                    Krofta Sedicell and Algas filters

 

PARTLY DISMANTLED

— — 2550 mm 200 t/day
1 verfügbar

Papiermaschine für Fluting 2800 mm

Used paper machine
Products: High performance fluting paper
Testliner 3 one lay
Wire width: ca 3360 mm
Net width: ca 2800 mm
Production capacity: ca 200 t/day
Grammage range: 90 – 150 GSM
Speed: mechanical 500 m/min, production 450 m/min
Paper machine efficiency 94 %
Predrying section installed: ca. 1990.
Postdrying section installed : 1960 ies, with replacements more recently.
Power requirement: Ca 4 MW for paper line
- No basement is required for installation. The entire paper machine is at level 0


Consisting of following main components:
Approach flow system 3 HD cleaner Black Clawson
3 Pressure screens Black Clawson / Ahlstrom
Fan pump / Stock pumps Made by Scanpump
In stainless steel
Headbox: Year ca 1990
Made by Allimand with
Cross flow distributor
22 spindle adjustments
Wire section: Made in stainless steel
Press section 1. Press
2. Press
Drying section Drying cylinders with 10 bar, casted by SAFEM /France
Size press
After dryer section
Hood Supplies by Bellmer
www.paptec.com ID: 5635 3/4
Measurex scanner Year 2002
Turn up System: Made by IBS Type RCS 3001
Pope reeler ca 5 units Tambours
Overhead crane
Vacuum system Hibon vacuum pumps
2 x size 140
2 x size 50
Size press kitchen
Rewinder Made by A Celli
Bale width 3100 mm
Refurbished ca 2015 by Thiry Belgium
Speed ca 1500 m/min
Steam and condensate
system: Continuously updated
Starch preparation
Hydraulic unit
Continuously updated controls
Lot of spare parts, for every press roll min 1 spare roll included
Big assortment of felts
Control system: The currently installed control system is connect-ed with the still running part of the mill and not available.
Stock preparation: The stock preparation is not available. Currently we can provide a stock preparation line from an-other location.

 European Fourdriner 2800 mm net width 200 t/day