Verkaufsliste

Very nice corrugator from roll to cutted material. Running with electrical energy only. 400 V

Flute type:                                          SE       B         SB       N         E         F

Flute height:                                       1.40     2.50     2.50     0.40     1.40     0.75

Flute factor:                                       1.25     1.35     1.35     1.136   1.34     1.22

Stitch:                                                  4.50     6.50     6.50     1.90     4.50     2.40

Maximum gross width:                      127 cm

Maximum net width (2):                    120 cm

Minimum paper width:                       74 cm (applies to all waves types)

Reel width min:                                  2 x 1.5

Reel width max:                                 2 x 80 mm

Second hand / used combined cutline 1632

Prefeeder PARA
Martin suction plate feeder
2 color printing
Simple slotter
Rotary cutter
Folder from above
Valco gluing machine
Rapidex stapler
Counter ejector from below
MOSCA Bundle Tying Machine

Equipment maintained and still functional.

Technical details:
Infeed:  Automatic
Operation:  Electro-mechanical/pneumatic
Max. machine speed:  14 cycles/min.
Max. production speed:  13 cycles/min.
Roll infeed height:  770 mm
Pack exit height:  1150 mm
Weight:  5500 kg (approx)
Av. size change-over time:  35 min. (approx) 2 Operators
Av. size adjustment time:  20 min. (approx) 2 Operators
Roll change time:  5 minutes
Ambient conditions
• Temperature from +5 to +40°C
• Relative humidity Max. 70%

PNEUMATIC SYSTEM
Air pressure:  6 bar
Compressed air consumption Max.:  800 Nl/min

ELECTRICAL SYSTEM (STANDARD)
Installed power:  23.5 KVA
Standard voltage:  3x380/415/440 V (+/- 5%) + earth
Voltage variation:  +/- 5%
Frequency:  50/60 Hz
Neutral wire:  None
Electrical cabinet voltage:  220 V AC
PLC I/O card voltage
• Inputs/outputs 24 V DC
• Solenoid valve outputs 24 V DC
• Contactor outputs 24 V DC

PRODUCTS TO BE PACKED
Pack height (H) from 95 to 305 mm
Pack width (W) from 95 to 560 mm
Pack length (L1) from 190 to 560 mm

FINISHED PACKAGE DIMENSIONS
Pack width (W):  From 330 to 780 mm
Max.:  850 con H 250mm
Max.:  700 con H 345mm
Max.:  720 con H 400mm
Pack length:  (L) From 200 to 800 mm
Pack height:  (H) From 195 to 305 mm
400 mm (Optional)

Grey millboard production machine

Grammage range: 1000 - 2000 GSM
Width: 2850 mm
Capacity: 36 t/day

Consisting of
Approach flow system:
1 Voith size 10 pressure screen
1 Finkh vibrating screen
1 Andritz Mixing pump

Board machine:
2 cylinder mould
Coutch roll

Forming section with:
Forming roll: 1500 mm diameter
Pre press roll: 350 mm diameter
Breast roll: 460 mm diameter
Complete with drive, spare rolls

General refurbishment: 1991
Refurbishment: year 2007, Renewing of cylinder mould with couch roll,
Installation of Siemens S7, Framing in stainless steel
Octopus distributor in stainless steel.
Table, working width 3.000 mm
Length: 6.000 mm

Table
Working width: 3.000 mm
Length: 7.000 mm
With guide roll and embossing calander

Table
Working width: 3.000 mm
Length: 5.500 mm

Length cutting unit
Working width: 4.00 mm
Length: 2.500 mm
With water jet cutting

Steam - Flat dryer
Made by: Schilde
Transport with chains
Working width: 4.800 mm
Dryer length: 18.000 mm
With ventilators
Refurbished: 2008

Table
Working width: 4.800 mm
Length: 3.000 mm
Refurbished: 2007

Gas Dryer
Heating power: 1.400 kW
Made by: Dornier
Working width: 4.00mm
Dryer length: 14.000 mm
With heat exchange and heat recovery
Year: 2007

Flat dryer
Hot air drying
Made by: BSH
Working width: 4.800 mm
Length: 25.000 mm
With 5 Drying chambers
Gas burner Ventilators
Heat recovery
Refurbished: 2008

Table
Length cutting device
Made by: Schohr
Year: 1973

2 Hydraulical layboys