Verkaufsliste
| Hauptbild | Name | Hersteller | Typ | Größe | Kapazität |
|---|---|---|---|---|---|
| — | Niedrigkonsitenzpulper 100 m³ mit Zuführband |
— | Low consitency Pulper | ca 100 m³ | — |
| — | Hydraulic Headbox 3229 mmStock cons.: 0,35 - 0,8 % Retention wire: ca 82% Grammage range: 38 - 250 GSM Wire width: Outlet width: 3229 mm
Dilution water distributor Number of dilution zones: 95 |
German manufacturer | — | Outlet width: 3.229 mm | 20.500 - 36.800 l/min |
| — | Screw compressor Compair Sirius 132 WScrew compressor: Manufacturer: Compair Type: Sirius 132 W Regulated: 6,0 7,5 bar 24m³/min |
Compair | Sirius 132 W | — | — |
| — | Used Yankee dryer, MG cylinder for paper machine |
European | — | 4200mm x 2250 mm net width | — |
| — | Überholung von VakuumpumpenSie erhalten von uns gebrauchte Original- Vakuumpumpen der Hersteller Nash und Voith optional inklusive Überholung. Die Überholungen werden durch Spezialisten mit 25 Jähriger Erfahrung in Vakuumsystemen durchgeführt. Jede überholte Pumpe wird vor Auslieferung auf einem Prüfstand zertifiziert.
|
Nash / Voith | All types | All sizes | — |
| — | Twin-Wire Gapformer Newsprint machine 6800mmGapformer Newsprint machine: manufacturer: Beloit type: Twin-Wire Gapformer year of manufacturing: 1974 years of major rebuilt: 1994 - 1996 - 2006 working width at the pope reel: 6800mm capacity: paper machine 100 000 tpy and deinking stock preparation 70 000 tpy operating speed: 780m/min design speed: 1000m/min basis weight range: 40-80g/m² raw material: waste paper, newsprint and magazine drive side: left in paper run direction drive voltage: 380V frequency: 50Hz |
— | Twin-Wire Gapformer | 6800mm | — |
| — | Complete paper machineSecond hand paper machine, one lay, for fluting paper Optimal grammage: 140gm-² Max. Speed (140gm-²): 360 m/min Headbox: Neyrtec Press: modernisation 1992
|
— | Fourdriner | ca 2,5 m | 167 t/d |
| — | Entstipper JJF 315 Sunds |
Valmet / Sunds / metso | JJF 316 | 315 | — |
| — | Ersatzteile für DSR 2 Refiner1 x Flender gearbox which is in as new condition. Gearbox was never installed RPM N1: 1485 N2: 609,8 2 x bearings NUB Z 324 1 x sleeve for main shaft 1 x shaft for stator (not main shaft) 1 x stator 1 x coupling 2 x set of unused fillings 10 Degress knife angle for cutting, not defibrillating use |
Escher Wyss | DSR 2 | 2 | — |
| — | Vakuumpumpe Voith 8 EVacuum Pump: manufacturer: Voith type: 8 E |
Voith | 8E | — | — |
| — | Hanssen Winder 1600 mmWinder: manufacturer: Ahlström- Hanssen basis weight: 120 - 600 g/m² width: 50 - 1600 mm max. speed: 800 m/min max. unwind diameter: 1500 mm unwind core diameter: 76, 100, 150 mm max wind up diameter: 1500 mm wind up core diameter: 76 and 100 mm tension: 70 - 280 kg/m time to max speed: 50 sec brake time: 35 sec electrical supply: 380 volt, 50 Hz |
— | — | 1600 mm | — |
| — | Screw compressor CompAir Sirius 160 WDScrew compressor Manufacturer: CompAir Type: Sirius 160 WD Settled: 6,0 7,5 bar 12 - 28,5m³/min |
CompAir | Sirius | — | — |
| — | PM Kalander Kuesters 2400mmpre used /used/ Second hand Machine Calander made by Küsters manufacturer: Küsters speed approx: 350 m/min Width: 2400 mm
|
Küsters | — | 2400 mm | 350m/min |
