Verkaufsliste
Hauptbild | Name | Hersteller | Typ | Größe | Kapazität |
---|---|---|---|---|---|
1 verfügbar |
Paper machine 2550 mmmachine width: 2550mm Max. speed: 200 m/min BW range: 30-400grs/m² Supply voltage: 3 x 500 Volts Steam pressure: 4 bar Air pressure: 7 bar Water pressure: 2 bar Water consumption: 40 Lts/Kg Steam consumption: 3.0 Kg/kg PM only from headbox to pope-roll.
MACHINE DESCRIPTION Has produced a wide range of products: Production range is from 30 to 400 GSM running at 50 to 220 m/min. Paper with at reel is 2550 mm max. Capacity is up to 3500 Kg/h. Main characteristics is its formation uniformity CM and MD, gradual drying rate both wet and steam dried. GENERAL DESCRIPTION FORMING SECTION WITH DANDY ROLL It is a Fourdrinier type with removable table for wire change, cantilever couch roll, closed headbox for optimal flow rate at any speed and watermarking Dandy Roll. PRESSES Three 80 kg /cm2 presses, 2 lower felt and a 3rd upper felt, allowing good drying capacity and surface smoothing. Water content after presses is about 50% below 120 GSM. DRYING Consist in a main battery of 18 driers of 1250 mm diameter, in 3 drive sections with drying felts on both sides. Post drying after size press is done with 6 driers, 4 of 1000mm dia and 2 1250mm diameter in one drive section, with automatic paper moisture control. All driers tested at 4 Bar, heated with steam at 3.7 Bars max. All sections covered by a recovery heat hood that allows pocket ventilation at 90 degrees Celcius. SIZE PRESS Two rubber 350 mm diameter rolls working at 20 Kg/cm allows sizing with starch and latex. CALENDER STACK Küsters 400mm dia King roll, 2 intermediate 330mm dia rolls and un upper 400mm dia Queen roll that can be used as a one pass or three pass calender up to 80 Kg/cm. MACHINE DRIVE It is a line shaft with conical pulleys, pneumatic clutch and angular reducer for 11 sections. Motor drive is 300 Kw dc. SECURITY PAPER MACHINE
|
— | — | 2550mm | 3,5 t/h |
1 verfügbar |
HeftmaschineHeftmaschine von Krupp zu verkaufen Motor: KW:0,25 ED: 100 U/min: 905
|
Krupp | — | — | — |
1 verfügbar |
Unbenützte ca 40m Reject Transportschnecken |
— | — | ca 40 m overall length | — |
1 verfügbar |
Seilspanner |
Allimand | — | — | — |
1 verfügbar |
Umroller für hohe Grammaturen 1950 mmGebrauchtmaschine: Hersteller GU: SWT Eklektisches Konzept: HSA Emerson Nennstrom: 630 Amp Antriebe: SEW Drehstromantriebe Getriebe: SEW Kegelradgetriebe Leistung Aufwickelstation 1: 30 KW Leistung Aufwickelstation 2: 30 KW Antriebsart: Frequenzumrichter Kommunikation: Siemens S7 CPU 300 Produktionsgeschwindigkeit: 60m/min Bahnzug Aufwickelstation 1: 2000N Bahnzug Aufwickelstation 2: 2000N Materialdicke: 2,0mm Rollendurchmesser: 1500mm Rollenbreite: 1950mm
|
SWT | — | — | — |
1 verfügbar |
Tissue paper production line 74 t/day with stock preparation and rewinderUsed tissue paper production line: Consisting of: Stock preparation for virgin pulp - Pulper - Refiners - Screening - Disc filter
Paper machine Headbox: Single layer, year 1990 ies Vacuum system
Rewinder with 4 unwind stands |
European | — | — | 74 t/day |
1 verfügbar |
Headbox 2900 mmGebrauchter Headbox Slice width: 2.900 mm Max. flow rate: 33.700 l/min Min. flow rate: 13.800 l/min Design speed 800 mpm |
— | — | — | Max- min flow rate 33700 - 13800 l/min design speed: 800 m/min |
1 verfügbar |
Kartonquerschneider ca 3000 mmEinfacher, Querschneider älteren Baujahrs mit Pick-up Abrollung und Palletierer |
European | — | ca 3000 mm width | — |
— | Gas turbine plant including generator & waste heat boiler4600 kwGasturbine year of construction: 1990 es Electrical output: 4.600 kWel Speed: 14.944min.-1 50Hz Fuel: natural Gas H Turbine inlet temperature: 665°C (1.229°F)
Generator (in the package) Manufacturer: ABB Type: 3 phase synchronous Year of manufacturing: 1990 ies Rated power: 6.000 kVA Speed: 1.500 rpm Cos phi: 0.98 (nominal 0.8) Frequency: 50 Hz Rated voltage: 10.5 kV
|
— | — | — | — |
1 verfügbar |
Heizöltank 50.000 Liter neuwertig50.000l doppelwandig, oberirdischer Lagertank neu Nach EN 12285-2, Tanktyp D mit CE-Kennzeichnung für HZ Lagermedium Heizöl Form: Zylindrisch liegend mit 2 angeschweißten Sattelfüßen Farbe RAL 7035 Lictgrau Behältergröße: Länge 10.680 mm; Durchmesser 2.500 mm Gewicht 8.000 KG Ausstattung/ Armaturen: Dom 600 mm mit Schrauben, Domdeckel und Dichtung |
— | — | 50.000 liter | — |