Laminating machine 2050 mm
Weitere Papierverarbeitungsmaschinen
Technische Daten:
Beschreibung:
laminating line for processing paper, thermoplastic films, polyester and fleece, with a two-section dryer, applicator unit and separate laminating station.
|
2,050 mm |
50 m/min |
1,000 mm |
79 kW |
|
max. web width |
production speed |
max. roll diameter |
installed drive power* |
Technical highlights
|
Working width |
630–2,050 mm; special minimum 300 mm* |
|
Roll width |
2,150 mm |
|
Design / drive speed |
100 m/min |
|
Production speed |
50 m/min |
|
Creep speed |
4 m/min |
|
Wet run |
4–10 m/min |
|
Acceleration / deceleration |
Approx. 10 s to 100 m/min |
|
Installed drive power |
45 kW DC drives + 34 kW AC drives = 79 kW |
|
Electrical supply |
3-phase, 380 V, 50 Hz; control voltage 220 V |
|
Compressed air |
6 bar; 10 bar for laminating |
|
Cooling water |
15 °C, 2–4 bar |
Unwind and rewind
|
Unwind 1 – material |
Paper and thermoplastic films |
|
Unwind 2 – material |
Polyester and fleece |
|
Unwind roll diameter |
Max. 1,000 mm |
|
Unwind core inner diameters |
70 / 76 / 150 mm |
|
Unwind max. roll weight |
1,800 kg each |
|
Web tension – unwind 1 |
2–40 kp |
|
Web tension – unwind 2 |
1–40 kp |
|
Rewind – material |
Laminate |
|
Rewind roll diameter / weight |
Max. 1,000 mm / max. 1,800 kg |
|
Rewind core inner / outer diameter |
70 / 76 / 150 mm inner; 90 / 185 mm outer |
|
Rewind web tension |
6–150 kp |
Process units
|
Applicator unit 1 – metering roll |
Ø 300 mm |
|
Applicator unit – pressure roll |
Ø 180 mm |
|
Applicator unit – support roll |
Ø 300 mm |
|
Dynamic bearing load |
Max. 2 × 10 t |
|
Applicator roll torque limit |
Up to 45 mkp |
|
Dryer |
2 sections, 2 m length per section |
|
Dryer temperature zones |
2 |
|
Air circulation |
7.5 m³/s per section |
|
Dryer blowers |
Two-stage, variable-speed |
|
Dryer heat transfer medium |
Hot water, 14 bar / 180 °C |
|
Air outlet velocity |
45 / 25 m/s |
|
Heated cylinder |
1 × Ø 500 mm; thermal oil |
|
Cooling cylinder |
1 × Ø 400 mm; cooling water, 20 °C inlet |
|
Laminating station pressure roll |
Ø 120 mm |
|
Laminating station steel support roll |
Ø 210 mm |
Utilities and operating data
|
Heating energy – dryer |
120,000 kcal/h (as stated in documentation) |
|
Heating medium / exchanger test |
Hot water 14 bar; heat exchangers tested at 25/40 bar |
|
Electrical protection |
DC motors: Ex-proof execution noted; other DC motors IP23; cabinets outside Ex area IP54 |
|
Power supply |
Three-phase current, 380 V, 50 Hz |
