Speed:                                             2.35 m/min

Grammage range:                           45-180 g/m

Dimensions:                                     510 x 182 x 130 cm

Fourdrinier PM

2 Nip press section

4 drying groups with a total of 14 electrically heated drying cylinders

Process guide system. Control of:

• Machine speed (10 drive groups)
• Pulp and water quantities (hc pulp, felt water, headbox)
• Additive dosing
• Drying cylinder temperatures

Included components

2 x 400 l stock tanks:

2 x mobile stock tanks 400 l incl. agitator+ Hand gear – stainless steel with associated FU control cabinet

Dimensions tank: 130*180*110

one 400 l vat, stainless steel without gear and without cover

Electrical supply:

FU cabinet: 63*76*35,5

Security: 31*30*15

Mixing container

1 x mixing container – up to 60 l – stainless steel incl. agitator PLS controlled

Dimensions W*H*D: 70*160*70

Screen water tank

1 x screen water tank ~120 l – stainless steel incl. agitator controlled by PLS

Dimensions W*H*D: 70*146*70

Water and LC pumps

5 x Netzsch pump NM031SY/X288135

• 1 x thick material circuit
• 1 x screen water pump – IDM controlled
• 1 x slurryfeed pump – IDM controlled
• 1 x section water pump – level controlled
• 1 x spare  / Backup

Dimensions: 108 x 27 x 31

Suction water tank

2 x suction water tank ~200 l – stainless steel

Dimensions W*H*D: 126*151*55

Vacuum system

Vacuum system with water separator

Dimensions W*H*D: 152*155*110

Pre dryer cylinders and post dryer cylinders

Manually switchable

Independent of vacuum system for screen and press dewatering

Dosing rake

• Stainless steel frame for mounting additive dosing lines, IDMs, thick material pump, level tank, filler tank, connection boxes for stock boxes

Dimensions W*H*D: 245*200*100

• 4 x additive dosing line

Each with 1 glass container incl. agitator 10 liters+ 1 IDM+ 1 PLS-controlled screw pump regulated

• 1 x thick liquid pump

PLS-controlled with upstream level tank including agitator, overflow, and MDM Dosing points in pipe to mixing tank

• 1 x 20 l filler tank including agitator
• 2 x CCE socket + Kalleiter for 400 l vat
• 2 x schuko socker

Control cabinets

5 x 1.20m wide, housing for control system. Electrical supply

1 x 0.8 m wide

Dimensions W*H*D: 680*223*60

Laboratory refiner

• Andritz test refiner 400V – Type: 12-1C

SingleDisk, manually adjustable grinding gap. Includes grinding set and material pumps, control panel and motor

Dimensions W*H*D: 230*155*110