Paper machine for coated paper production
PM Grafisches- / Verpackungspapier
Technische Daten:
Maschine:
Paper machine for coated paper production
Artikel-Nr.:
6257
Typ:
Coated paper production with online coating 2.8m,
Größe:
2.8m
Kapazität:
730m/min. ca. 130 T/D.
Beschreibung:
Paper Machine: Beloit Coated Wood Free
Final paper gsm: 40-160
Base paper gsm: 30 - 110
Max width: 2,8 m
Final paper gsm: 40-160
Base paper gsm: 30 - 110
Max width: 2,8 m
Max speed: 730 mpm
Approach: 4 stage cleaners; 3 stage screen slot 0,25 mm +dilution screen
Headbox: Voith ModuleJet
Wire width: 3500 mm
Press section: (2) press + offset
Pre drying section: Beloit type 4140,(4 group double felted)
Approach: 4 stage cleaners; 3 stage screen slot 0,25 mm +dilution screen
Headbox: Voith ModuleJet
Wire width: 3500 mm
Press section: (2) press + offset
Pre drying section: Beloit type 4140,(4 group double felted)
Dryer diameter: 1522 mm
Post drying section: (17) IR row; (1) air dryer BMB + (3) dryer
Post drying section: (17) IR row; (1) air dryer BMB + (3) dryer
One speed sizer
Kuster roll for hardnip calander
Pope reel : Centerwind
QCS AccuRay 1180
Kuster roll for hardnip calander
Pope reel : Centerwind
QCS AccuRay 1180
Winder wih 1100 m/min.
make: VariPlus 2000
Steam pressure: 2,8 bar
Number of dryier: 36
Precoater: BillBlade
Number of dryier: 36
Precoater: BillBlade
Two supercalenders available
Calender 1:
Nip: 11
Max. Speed: 650 m/min.
Make : Kleinwefers
Operationing Speed: 450 m/min.
Supercalender 2:
Nip: 9
Max. Speed: 500m/min.
Operating speed: 300 m/min.
Flat table section: (length 14.5 m; width 3.30 m).
Forming board; - N. 10 single foils; - N. 3 hydro foils - N. 4 vacu foils; - N. 1 enervac - N. 1 dandy roll, diameter F 1,000 mm; - N. 10 flat boxes (suction boxes)
Press section:
First pick-up and granite press; - Second fabric press; - Third reverse press; - Fourth smoothing press.
Coating section:
N. 3 dry patina filtration stations, with Ronnigen filters;
N. 2 Beloit scraping blade coating heads, with Training blades - floated nip (applicator + support);
N. 2 gas infrared ray stations;
N. 1 infrared ray station for lateral profile control;
N. 1 air hood on the felt;
N. 1 group with n. 2 drying cylinders;
N. 1 group with n. 4 drying cylinders
