Stoffaufbereitung

Gebrauchte Maschinen zum Herstellen von Zellstoff sowie zum Aufbereiten von Altpapier zu verwendbarem Fasermaterial.

Hauptbild Name Hersteller Typ Größe Kapazität

Rotor für VOITH ST5C-A Pulper

Voith ST5C-A

Rührwerk Voith

Gebrauchte Rührwerke

 

Voith

LC Refiner Enso Bauer 442 M

Second hand LC  Refiner Enso Bauer 442 M:

Diameter 813 mm

Rotation speed: 530 mm

Load max.: 250 kW

Feed consistency: 2 - 5%

Through put: 200 - 2400 l/min

Enso Bauer Disc refiner 813 mm

Refiner - Getriebe Metso 1C250RE

Metso 1C250RE

Horizontal Drucksortierer Lamort CH 3

Basked with slots.

Drive: motor 18 [kW], belt transmission,

Maximum concentration 3 – 4 %, depending on pulp parameters and basket design,

Lamort CH 3 40 t/24h

Refiner Beloit Fibermaster 2 SA 250

2 Gebrauchter Fibermaster:

- Erster Fibermaster:

Garnitur 1 Jahr gelaufen

 

- Zweiter Fibermaster:

Ohne Garnitur

 

Beloit Fibermaster 2 SA 250

Getriebe Elli 600 KW

Gebrauchte Getriebe

Ratio: 1/27.706

2 Eingang / 1 Ausgang

Total power: 601 KW

Elli C3.450 600 KW

Kanalrechen / Kanalsieb 380 mm Rechenbreite

Kanalrechen mit einer Rechenbreite von 380 mm

Für eine Kanalbreite von 580 mm

General functional description:
The filter screen helps to mechanically clean liquids, mainly communal and industrial waste water. The liquid flows through the drain, in which the machine with its lower machine frame is installed. The filter frame essentially comprises a continuous filter belt, which consists of perforated filter cages with rakes. The filter cages are attached to a conveyor chain on both sides, which drives the filter belt. The filter cages are in the form of an arc. The filter cages of the machine restrain organic and inorganic rejects. The filter area is occupied by the restrained rejects, through which the free area is reduced. This lowers the volume of flow or the differential level (calculated from the water level before and after the machine) increases. If a measuring device ascertains that a predetermined limit value has been exceeded in case of the water level, the filter belt starts moving. The occupied part of the filter area (in the direction of flow before the screen) moves from the drain and is cleaned at the upper deviating point using a rotat-ing brush roller. The cleaning is supported by a nozzle bar, which is operated at a water pressure of approximately 3 bar. The cleaned filter belt runs downwards on the rear side of the screen and dips into the drain (the cycle re-starts). The restrained screenings fall under the brush hood into a flume, press with funnel, a conveyor, a container or another receptacle.

 

FSM FRS 3 380 mm rake width

Winkelpresse Schlammpresse WPH 2 Bellmer

Gebrauchte Winkelpresse WPH 2 in Edelstahlausführung

Bellmer WPH 2 1500 mm

Siebkorb MS 10 Voith

Gebrauchte Siebkorb MS 10 Voith

Schlitz 0,15 mm

C-bar

Voith MS10