PM Grafisches- / Verpackungspapier
| Hauptbild | Name | Hersteller | Typ | Größe | Kapazität | |
|---|---|---|---|---|---|---|
| — | Papermaschine für graphische Papiere |
Valmet | Paper machine for graphical paper | 8350 mm | 1500 m/min | |
| — | Papiermaschine für Fluting 2500 mm |
Asian | Foundrinier | 2500 mm | 120 t/day | |
| — | Papiermaschine Test Liner, Corrugated MediumTest Liner and Corrugated Medium Paper machine Basis Weight : 90 ～ 200 g/㎡ Paper Width : 1). 3,850 mm at Winder Trim Working Speed : 450 m/min with 175 g/㎡. Production Capacity : 436MT/Day on 100% Efficiency bases on 175 g/㎡ |
— | Fourdrinier | 3850 mm at winder | 436 tpd | |
| — | Paper machine for fluting paper, 2400 mm, 100 t/daySecond hand paper machine for fluting paper, trim width ca. 2400 mm, capacity ca. 100 t/day, including waste paper stock preparation |
— | Fourdriner | 2400 mm trim width | 100 t/day | |
| — | Paper machine for fluting paper 2550 mm, 200 t/daySecond hand paper machine for fluting paper Deckle/ pope reel width: 2550 mm GSM range: 80 – 250 GSM Speed: 800 m/min Capacity: 200 t /24 h Refurbished: 2016 – 2017
Consisting of: Approach flow system Included Headbox: 2 / Comer Wire: Twin wire Press section: Binip press with suction roll Jumbo Press Drying section: 32 dryers / 5 bar Size press: Included Calendar: Voith / Küsters Hood: New Forbes Marshal steam & condensate with heat recovery
Drive: AC silent drive Rewinder: Included Voltage: 380 V Stock preparation: Included Water treatment: Krofta Sedicell and Algas filters
PARTLY DISMANTLED |
— | — | 2550 mm | 200 t/day | |
1 verfügbar |
Papiermaschine für Fluting und Testliner 2800 mmGebrauchte Papiermaschine für Fluting und Testliner 2800 mm beschnittene Arbeitsbreite 200 t/24 h Kapazität Mit Konstantteil Verkauf ohne Stoffaufbereitung, diese kann separat geliefert werden. |
European | Fourdriner | 2800 mm net width | 200 t/day | |
1 verfügbar |
Papiermaschine für Dekorpapiere 2280 mmUsed paper machine Trim width: 2280 mm Speed: 600 m/min - 900 possible Grammage range: 45 – 200 GSM
Scope of supply: Approach flow system, paper machine, |
— | Fourdriner | 2280 mm | 600 m/min 45 -200 GSM | |
1 verfügbar |
Paper production line for grapic papers with stock preparation 450 t/day- Stock preparation system for waste paper, vacuum system, heat recovery and bleaching line are included! - Fourdrinier paper machine - 2 Prewinders |
European | Fourdriner | 5 - 6 m | 450 t/day | |
1 verfügbar |
Kraft Paper Mill 3350mm - AsiaUsed 3350mm Kraft Paper Mill Manufacturer: Mitsubishi Stopped year: Feb. 2023 Product: Kraft paper, one glossed paper GSM: 30-180g/㎡ Production capacity: 100ton/day Final Product Width: 3350mm Design speed: 150-550m/min Operation speed: 390m/min
Head box Manufacturer: Hitachi Width direction adjustment device: CP
Wire part Manufacturer: Mitsubishi Wire width: 3710mm Fourdrinier type Dandy roll
Press part Manufacturer: Mitsubishi 1P: twin bar press, linear pressure: 45N/mm 2P: twin bar press, linear pressure: 80N/mm 3P: straight through press, linear pressure: 90N/mm Sheet moisture in outlet of press: 60% The number of cylinders in Pre-dryer : ∅1524mm x 10units There are no size press and coater The number of cylinders in after-dryer: Yankee ∅4572mm x 1unit
Steam pressure Main steam pressure (inlet of dryer): low 0.3/Medium 0.7MPa Mean steam pressure (pre-dryer): 0.2MPa Mean steam pressure (after dryer): Yankee 0.35MPa
Dryer hood Manufacturer: Mitsubishi Dew point: 35g 56°C, 120g 61°C There is no calendar
Reel part Manufacturer: Mitsubishi Secondary arm type Maximum diameter of reel: ∅1800m
Winder Manufacturer: Mitsubishi Two drum type The number of slitters: 8 units
Quality control system: BM The number of scanner: 1unit Measuring sensor: GSM, moisture Flow direction control system: seed valve, steam pressure Width direction control system: CP Profile control actuator: CP valve Defect detector
Sheet inspection system Defect detector Manufacturer: OMRON
Drive system Manufacturer: Toshiba Manufacturing year: 1990’s DC 400V, 440V |
Mitsubishi | Kraft Paper Mill | 3350 mm | 100 t/d | |
1 verfügbar |
Kraft Paper Mill 3270 mm MitsubishiUsed 3270mm Kraft Paper Mill Manufacturer: Mitsubishi Final Remodeling year: 1990’sSecond hand Final Product width: 3270mm GSM: 40-140g/㎡ Production capacity: 200ton/day Twin wire type Design speed: 1000m/min Operation speed: 706m/min
Head box Manufacturer: Sumitomo Seam former–MB type Width direction adjustment device: delusion
Twin Wire part Manufacturer: Mitsubishi Wire width: 3750mm Fourdrinier type Dandy roll
Press part Manufacturer: Mitsubishi 1P: twin bar press, linear pressure: 48N/mm 2P: twin bar press, linear pressure: 60.7N/mm 3P: straight through press, linear pressure: 88.2N/mm Sheet moisture in outlet of press: 50~55% The number of cylinders in Pre-dryer : ∅1524mm x 41units
Size press and coater Manufacturer: Mitsubishi Gate roll size press type Coating weight: 0.1~2.5 BD g/m2 The number of cylinders in after-dryer : ∅1524mm x 12units
Steam pressure Main steam pressure (inlet of dryer): 0.3MPa Mean steam pressure (pre-dryer): 0.18~0.23MPa Mean steam pressure (after dryer): 0.11~0.18MPa
Dryer hood Manufacturer: Evara Dew point: 35g 56°C, 120g 61°C
Calendar Yodogawa The number of rolls: 2+3 Maximum linear pressure: 120KN/m
Reel part Manufacturer: Mitsubishi Secondary arm surface type Maximum diameter of reel: ∅2400m
Winder Manufacturer: Mitsubishi Shaft-less two drum winder The number of slitters: 6 units
Quality control system: BM The number of scanner: 1unit Measuring sensor: GSM, moisture, color, carriper Flow direction control system: seed valve, steam pressure Width direction control system: CP Profile control actuator: CP valve Defect detector
Sheet inspection system Defect detector Manufacturer: OMRON
Process automation system Manufacturer: Valmet
Drive system Manufacturer: Toshiba Year: 1990‘s AC 420V
|
Mitsubishi | Kraft Paper Mill | 3270mm | 200 t/d |
