Papiermaschinen
Hauptbild | Name | Hersteller | Typ | Größe | Kapazität |
---|---|---|---|---|---|
1 verfügbar |
Paper machine 2550 mmmachine width: 2550mm Max. speed: 200 m/min BW range: 30-400grs/m² Supply voltage: 3 x 500 Volts Steam pressure: 4 bar Air pressure: 7 bar Water pressure: 2 bar Water consumption: 40 Lts/Kg Steam consumption: 3.0 Kg/kg PM only from headbox to pope-roll.
MACHINE DESCRIPTION Has produced a wide range of products: Production range is from 30 to 400 GSM running at 50 to 220 m/min. Paper with at reel is 2550 mm max. Capacity is up to 3500 Kg/h. Main characteristics is its formation uniformity CM and MD, gradual drying rate both wet and steam dried. GENERAL DESCRIPTION FORMING SECTION WITH DANDY ROLL It is a Fourdrinier type with removable table for wire change, cantilever couch roll, closed headbox for optimal flow rate at any speed and watermarking Dandy Roll. PRESSES Three 80 kg /cm2 presses, 2 lower felt and a 3rd upper felt, allowing good drying capacity and surface smoothing. Water content after presses is about 50% below 120 GSM. DRYING Consist in a main battery of 18 driers of 1250 mm diameter, in 3 drive sections with drying felts on both sides. Post drying after size press is done with 6 driers, 4 of 1000mm dia and 2 1250mm diameter in one drive section, with automatic paper moisture control. All driers tested at 4 Bar, heated with steam at 3.7 Bars max. All sections covered by a recovery heat hood that allows pocket ventilation at 90 degrees Celcius. SIZE PRESS Two rubber 350 mm diameter rolls working at 20 Kg/cm allows sizing with starch and latex. CALENDER STACK Küsters 400mm dia King roll, 2 intermediate 330mm dia rolls and un upper 400mm dia Queen roll that can be used as a one pass or three pass calender up to 80 Kg/cm. MACHINE DRIVE It is a line shaft with conical pulleys, pneumatic clutch and angular reducer for 11 sections. Motor drive is 300 Kw dc. SECURITY PAPER MACHINE
|
— | — | 2550mm | 3,5 t/h |
1 verfügbar |
Papiermaschine für Fluting und Testliner 2800 mmGebrauchte Papiermaschine für Fluting und Testliner 2800 mm beschnittene Arbeitsbreite 200 t/24 h Kapazität Mit Konstantteil Verkauf ohne Stoffaufbereitung, diese kann separat geliefert werden. |
European | Fourdriner | 2800 mm net width | 200 t/day |
1 verfügbar |
Pappenmaschine 2850 mmGrey millboard production machine
|
European | Cylinder mould | 2850 mm | 36 t/ 24 h |
1 verfügbar |
Kraftliner Karton Papiermaschine 2950 mmKraftliner paper machine 2950 mm Basis Weight: 170 g/m² - 500 g/m² Machine speed: 120 m/min (200 g/m²) Paper Width: 2,950 mm Capacity: 100 tpd
|
— | — | 2950 mm | 100 tpd |
1 verfügbar |
Kraft Paper Mill 3270 mm MitsubishiUsed 3270mm Kraft Paper Mill Manufacturer: Mitsubishi Final Remodeling year: 1990’sSecond hand Final Product width: 3270mm GSM: 40-140g/㎡ Production capacity: 200ton/day Twin wire type Design speed: 1000m/min Operation speed: 706m/min
Head box Manufacturer: Sumitomo Seam former–MB type Width direction adjustment device: delusion
Twin Wire part Manufacturer: Mitsubishi Wire width: 3750mm Fourdrinier type Dandy roll
Press part Manufacturer: Mitsubishi 1P: twin bar press, linear pressure: 48N/mm 2P: twin bar press, linear pressure: 60.7N/mm 3P: straight through press, linear pressure: 88.2N/mm Sheet moisture in outlet of press: 50~55% The number of cylinders in Pre-dryer : ∅1524mm x 41units
Size press and coater Manufacturer: Mitsubishi Gate roll size press type Coating weight: 0.1~2.5 BD g/m2 The number of cylinders in after-dryer : ∅1524mm x 12units
Steam pressure Main steam pressure (inlet of dryer): 0.3MPa Mean steam pressure (pre-dryer): 0.18~0.23MPa Mean steam pressure (after dryer): 0.11~0.18MPa
Dryer hood Manufacturer: Evara Dew point: 35g 56°C, 120g 61°C
Calendar Yodogawa The number of rolls: 2+3 Maximum linear pressure: 120KN/m
Reel part Manufacturer: Mitsubishi Secondary arm surface type Maximum diameter of reel: ∅2400m
Winder Manufacturer: Mitsubishi Shaft-less two drum winder The number of slitters: 6 units
Quality control system: BM The number of scanner: 1unit Measuring sensor: GSM, moisture, color, carriper Flow direction control system: seed valve, steam pressure Width direction control system: CP Profile control actuator: CP valve Defect detector
Sheet inspection system Defect detector Manufacturer: OMRON
Process automation system Manufacturer: Valmet
Drive system Manufacturer: Toshiba Year: 1990‘s AC 420V
|
Mitsubishi | Kraft Paper Mill | 3270mm | 200 t/d |
1 verfügbar |
Kraft Paper Mill 3350mm - AsiaUsed 3350mm Kraft Paper Mill Manufacturer: Mitsubishi Stopped year: Feb. 2023 Product: Kraft paper, one glossed paper GSM: 30-180g/㎡ Production capacity: 100ton/day Final Product Width: 3350mm Design speed: 150-550m/min Operation speed: 390m/min
Head box Manufacturer: Hitachi Width direction adjustment device: CP
Wire part Manufacturer: Mitsubishi Wire width: 3710mm Fourdrinier type Dandy roll
Press part Manufacturer: Mitsubishi 1P: twin bar press, linear pressure: 45N/mm 2P: twin bar press, linear pressure: 80N/mm 3P: straight through press, linear pressure: 90N/mm Sheet moisture in outlet of press: 60% The number of cylinders in Pre-dryer : ∅1524mm x 10units There are no size press and coater The number of cylinders in after-dryer: Yankee ∅4572mm x 1unit
Steam pressure Main steam pressure (inlet of dryer): low 0.3/Medium 0.7MPa Mean steam pressure (pre-dryer): 0.2MPa Mean steam pressure (after dryer): Yankee 0.35MPa
Dryer hood Manufacturer: Mitsubishi Dew point: 35g 56°C, 120g 61°C There is no calendar
Reel part Manufacturer: Mitsubishi Secondary arm type Maximum diameter of reel: ∅1800m
Winder Manufacturer: Mitsubishi Two drum type The number of slitters: 8 units
Quality control system: BM The number of scanner: 1unit Measuring sensor: GSM, moisture Flow direction control system: seed valve, steam pressure Width direction control system: CP Profile control actuator: CP valve Defect detector
Sheet inspection system Defect detector Manufacturer: OMRON
Drive system Manufacturer: Toshiba Manufacturing year: 1990’s DC 400V, 440V |
Mitsubishi | Kraft Paper Mill | 3350 mm | 100 t/d |
— | Papiermaschine Test Liner, Corrugated MediumTest Liner and Corrugated Medium Paper machine Basis Weight : 90 ~ 200 g/㎡ Paper Width : 1). 3,850 mm at Winder Trim Working Speed : 450 m/min with 175 g/㎡. Production Capacity : 436MT/Day on 100% Efficiency bases on 175 g/㎡ |
— | Fourdrinier | 3850 mm at winder | 436 tpd |
1 verfügbar |
Langsieb-Papiermaschine 4200 mmGebrauchte corrugated medium Papermaschine: Type: fourdrinier Paper grade: corrugated medium Trim width: 4200 mm Speed: 600 m/min Grammage: 90 - 220 gsm Machine drive: sectional drive by DC motor and reducer Equipped with size press Location Asia, drive 60 HZ
|
— | Fourdrinier | 4200 mm | 550 t/d |
1 verfügbar |
Paper production line for grapic papers with stock preparation 450 t/day- Stock preparation system for waste paper, vacuum system, heat recovery and bleaching line are included! - Fourdrinier paper machine - 2 Prewinders |
European | Fourdriner | 5 - 6 m | 450 t/day |
1 verfügbar |
Corrugating Board Paper (or Kraft paper) Mill+ Stock PreparationPaper: Kraft (or Corrugating Medium, Test Liner Paper) Basis weight: 31-100 GSM (or 220GSM) Maximum paper width: 6520 mm Production capacity: 400 ton/day Design speed: 1,110 m/min Nominal speed: 400~800mm/min Slight motion speed: 10~60mm/min (At sequence, operation monitoring settings possible) Leveling speed: 100~999.9m/min (At sequence, operation monitoring settings possible) Rate of change per second: 0.1~1m/min/sec (slow speed) 1~5m/min/sec (rapid speed) Change time settings: 10%/200 seconds (10% change time can be set) Coating in size press: max. 1g/m2 (double-side) Reel winding length: 74m Reel winding maximum diameter: 2600mm The number of machine sections: 12 sections The number of motors: 42units (Manufacturing year: 2004) Manufacturing year of electric equipment: 2004
|
Metso / Beloit / Mitsubishi | Twin wire (or four wires) | 6520 mm | 400 t/d |