Papiermaschinen
Hauptbild | Name | Hersteller | Typ | Größe | Kapazität | |
---|---|---|---|---|---|---|
1 verfügbar |
Tissue Papiermaschine 2200 mmGeneral information: Paper machine Capacity: 39 [ton / day] Productioon speed: 360 - 400 [m / min] depending on grammage The range of basis weights produced 30 - 60 gsm Width of the sheet after headbox 2200 [mm].
With waste paper stock preparation - Pulper 15 m³ with feeding conveyor - Pulper discharge machine and first sorter - Hett separator with vibrating screen - Lamort ADS 5 pressure screen - Pressure screen made by Nelba - Lamort CH 3 pressure screen - Maule Kneater with a capacity of 60 t/day - Krofta Clarifier - Voith HD cleaner - Chest with 5 m³ volume
|
— | — | 2060 net width | 39 t/24 h | |
1 verfügbar |
Pappenmaschine 2850 mmGrey millboard production machine
|
European | Cylinder mould | 2850 mm | 36 t/ 24 h | |
1 verfügbar |
Paper machine 2550 mmmachine width: 2550mm Max. speed: 200 m/min BW range: 30-400grs/m² Supply voltage: 3 x 500 Volts Steam pressure: 4 bar Air pressure: 7 bar Water pressure: 2 bar Water consumption: 40 Lts/Kg Steam consumption: 3.0 Kg/kg PM only from headbox to pope-roll.
MACHINE DESCRIPTION Has produced a wide range of products: Production range is from 30 to 400 GSM running at 50 to 220 m/min. Paper with at reel is 2550 mm max. Capacity is up to 3500 Kg/h. Main characteristics is its formation uniformity CM and MD, gradual drying rate both wet and steam dried. GENERAL DESCRIPTION FORMING SECTION WITH DANDY ROLL It is a Fourdrinier type with removable table for wire change, cantilever couch roll, closed headbox for optimal flow rate at any speed and watermarking Dandy Roll. PRESSES Three 80 kg /cm2 presses, 2 lower felt and a 3rd upper felt, allowing good drying capacity and surface smoothing. Water content after presses is about 50% below 120 GSM. DRYING Consist in a main battery of 18 driers of 1250 mm diameter, in 3 drive sections with drying felts on both sides. Post drying after size press is done with 6 driers, 4 of 1000mm dia and 2 1250mm diameter in one drive section, with automatic paper moisture control. All driers tested at 4 Bar, heated with steam at 3.7 Bars max. All sections covered by a recovery heat hood that allows pocket ventilation at 90 degrees Celcius. SIZE PRESS Two rubber 350 mm diameter rolls working at 20 Kg/cm allows sizing with starch and latex. CALENDER STACK Küsters 400mm dia King roll, 2 intermediate 330mm dia rolls and un upper 400mm dia Queen roll that can be used as a one pass or three pass calender up to 80 Kg/cm. MACHINE DRIVE It is a line shaft with conical pulleys, pneumatic clutch and angular reducer for 11 sections. Motor drive is 300 Kw dc. SECURITY PAPER MACHINE
|
— | — | 2550mm | 3,5 t/h | |
1 verfügbar |
Used transformer board production line for saleUsed transformer board production line for sale: videos are available on demand. Scope of supply: Cellulose pulp preparation line: consists of two hydro pulpers for disintegration of 10 m³each, tanks, pumps, refiners 2 units with powers of 315 kw each, centrifugal sorters, etc. The sheet forming machine: consists of two stainless steel pick-up cylindrical sieves and a forming cylinder. Diameter in length: 2000 mm x 3200 mm. Sheets dimensions: 6300 mm x 3200 mm. Press: equipped with 8 pressing cylinders, arranged horizontally, with a diameter of 690 mm and working at 320 hydraulic bar
|
Swiss company Bell | — | — | 2500 t/year | |
1 verfügbar |
Papiermaschine für Fluting und Testliner 2800 mmGebrauchte Papiermaschine für Fluting und Testliner 2800 mm beschnittene Arbeitsbreite 200 t/24 h Kapazität Mit Konstantteil Verkauf ohne Stoffaufbereitung, diese kann separat geliefert werden. |
European | Fourdriner | 2800 mm net width | 200 t/day | |
— | Paper machine for fluting paper 2550 mm, 200 t/daySecond hand paper machine for fluting paper Deckle/ pope reel width: 2550 mm GSM range: 80 – 250 GSM Speed: 800 m/min Capacity: 200 t /24 h Refurbished: 2016 – 2017
Consisting of: Approach flow system Included Headbox: 2 / Comer Wire: Twin wire Press section: Binip press with suction roll Jumbo Press Drying section: 32 dryers / 5 bar Size press: Included Calendar: Voith / Küsters Hood: New Forbes Marshal steam & condensate with heat recovery
Drive: AC silent drive Rewinder: Included Voltage: 380 V Stock preparation: Included Water treatment: Krofta Sedicell and Algas filters
PARTLY DISMANTLED |
— | — | 2550 mm | 200 t/day | |
1 verfügbar |
Papiermaschine, 200 tato, grafische Papiere, BeloitManufacturer:Beloit Manufacturing year: 1970's GSM: 32-74g/m2 Production capacity: 200ton/day Product: Printing Paper B,C,D / Information Paper/ Newspaper Paper Design speed: 1100m/min Operation speed: 945m/min |
Beloit | — | — | 200t/d | |
1 verfügbar |
Kraft Paper Mill 3270 mm MitsubishiUsed 3270mm Kraft Paper Mill Manufacturer: Mitsubishi Final Remodeling year: 1990’sSecond hand Final Product width: 3270mm GSM: 40-140g/㎡ Production capacity: 200ton/day Twin wire type Design speed: 1000m/min Operation speed: 706m/min
Head box Manufacturer: Sumitomo Seam former–MB type Width direction adjustment device: delusion
Twin Wire part Manufacturer: Mitsubishi Wire width: 3750mm Fourdrinier type Dandy roll
Press part Manufacturer: Mitsubishi 1P: twin bar press, linear pressure: 48N/mm 2P: twin bar press, linear pressure: 60.7N/mm 3P: straight through press, linear pressure: 88.2N/mm Sheet moisture in outlet of press: 50~55% The number of cylinders in Pre-dryer : ∅1524mm x 41units
Size press and coater Manufacturer: Mitsubishi Gate roll size press type Coating weight: 0.1~2.5 BD g/m2 The number of cylinders in after-dryer : ∅1524mm x 12units
Steam pressure Main steam pressure (inlet of dryer): 0.3MPa Mean steam pressure (pre-dryer): 0.18~0.23MPa Mean steam pressure (after dryer): 0.11~0.18MPa
Dryer hood Manufacturer: Evara Dew point: 35g 56°C, 120g 61°C
Calendar Yodogawa The number of rolls: 2+3 Maximum linear pressure: 120KN/m
Reel part Manufacturer: Mitsubishi Secondary arm surface type Maximum diameter of reel: ∅2400m
Winder Manufacturer: Mitsubishi Shaft-less two drum winder The number of slitters: 6 units
Quality control system: BM The number of scanner: 1unit Measuring sensor: GSM, moisture, color, carriper Flow direction control system: seed valve, steam pressure Width direction control system: CP Profile control actuator: CP valve Defect detector
Sheet inspection system Defect detector Manufacturer: OMRON
Process automation system Manufacturer: Valmet
Drive system Manufacturer: Toshiba Year: 1990‘s AC 420V
|
Mitsubishi | Kraft Paper Mill | 3270mm | 200 t/d | |
1 verfügbar |
Tissue paper manufacturing line 15 t/day with rewinderGebrauchte Tissuepapier Produktionslinie inklusive Stoffaufbereitung für Zellstoff sowie Umroller |
European | — | 2310 mm trim | 15 t/d | |
— | Papermaschine für graphische Papiere |
Valmet | Paper machine for graphical paper | 8350 mm | 1500 m/min |