Verkaufsliste

Hauptbild Name Hersteller Typ Größe Kapazität

Esher Wyss Disperger 36" mit Zuführschnecke

Disperger 36" mit Zuführschnecke von Esher Wyss
Esher Wyss Disperger 36"

Pappenmaschine 2850 mm

Grey millboard production machine


Grammage range: 1000 - 2000 GSM
Width: 2850 mm
Capacity: 36 t/day


Consisting of
Approach flow system:
1 Voith size 10 pressure screen
1 Finkh vibrating screen
1 Andritz Mixing pump


Board machine:
2 cylinder mould
Coutch roll


Forming section with:
Forming roll: 1500 mm diameter
Pre press roll: 350 mm diameter
Breast roll: 460 mm diameter
Complete with drive, spare rolls


General refurbishment: 1991
Refurbishment: year 2007, Renewing of cylinder mould with couch roll,
Installation of Siemens S7, Framing in stainless steel
Octopus distributor in stainless steel.
Table, working width 3.000 mm
Length: 6.000 mm


Table
Working width: 3.000 mm
Length: 7.000 mm
With guide roll and embossing calander


Table
Working width: 3.000 mm
Length: 5.500 mm


Length cutting unit
Working width: 4.00 mm
Length: 2.500 mm
With water jet cutting


Steam - Flat dryer
Made by: Schilde
Transport with chains
Working width: 4.800 mm
Dryer length: 18.000 mm
With ventilators
Refurbished: 2008


Table
Working width: 4.800 mm
Length: 3.000 mm
Refurbished: 2007


Gas Dryer
Heating power: 1.400 kW
Made by: Dornier
Working width: 4.00mm
Dryer length: 14.000 mm
With heat exchange and heat recovery
Year: 2007


Flat dryer
Hot air drying
Made by: BSH
Working width: 4.800 mm
Length: 25.000 mm
With 5 Drying chambers
Gas burner Ventilators
Heat recovery
Refurbished: 2008


Table
Length cutting device
Made by: Schohr
Year: 1973


2 Hydraulical layboys
 

European Cylinder mould 2850 mm 36 t/ 24 h

Kartonquerschneider ca 3000 mm

Einfacher, Querschneider älteren Baujahrs mit Pick-up Abrollung und Palletierer

European ca 3000 mm width

TMP plant, 250 t/day, partly new, already dismantled

Komplette TMP - Anlage für eine Kapazität von ca 250 tato - 90.000 t/Jahr mit vielen Neuaggregaten

European TMP Plant 90.000 t/year

Tissue paper production line 74 t/day with stock preparation and rewinder

Used tissue paper production line:

Consisting of:

Stock preparation for virgin pulp

- Pulper

- Refiners 

- Screening

- Disc filter

 

Paper machine

Headbox: Single layer, year 1990 ies
Press section  Double (SPR + BPR), year 2000 ies
Yankee, year 2010 s
Max speed  1450 m/min

Vacuum system

 

Rewinder with 4 unwind stands

European 74 t/day

Two wire paper machine

Two wire paper machine for sale. Width over 4000 mm

Double ply paper machine, with 2 fourdriniers and headboxes.

Currently producing brown paper for containerboard: 

• 50% High Performance Fluting

• 5% Waste Based Fluting

• 30% Test Liner 1

• 15% Test Liner 3

With a weight range between 115 and 200 gsm

The following are the main PM characteristics for PM

• Operating speed up to 720 m/min

• Max drive speed 750 m/min

• Design speed dryer section 1000 m/min

• Max saleable width after rewinder 4640 m/min

European over 4000 mm

Sandabscheider ca 5 m Länge

Abscheider für schwere Schmutzstoffe

Länge ca 5 m

Schneckendurchmesser ca 50 cm

Edelstahl

inkl. Antrieb

European Sand separator

Papiermaschine für Fluting 2800 mm

Used paper machine
Products: High performance fluting paper
Testliner 3 one lay
Wire width: ca 3360 mm
Net width: ca 2800 mm
Production capacity: ca 200 t/day
Grammage range: 90 – 150 GSM
Speed: mechanical 500 m/min, production 450 m/min
Paper machine efficiency 94 %
Predrying section installed: ca. 1990.
Postdrying section installed : 1960 ies, with replacements more recently.
Power requirement: Ca 4 MW for paper line
- No basement is required for installation. The entire paper machine is at level 0


Consisting of following main components:
Approach flow system 3 HD cleaner Black Clawson
3 Pressure screens Black Clawson / Ahlstrom
Fan pump / Stock pumps Made by Scanpump
In stainless steel
Headbox: Year ca 1990
Made by Allimand with
Cross flow distributor
22 spindle adjustments
Wire section: Made in stainless steel
Press section 1. Press
2. Press
Drying section Drying cylinders with 10 bar, casted by SAFEM /France
Size press
After dryer section
Hood Supplies by Bellmer
www.paptec.com ID: 5635 3/4
Measurex scanner Year 2002
Turn up System: Made by IBS Type RCS 3001
Pope reeler ca 5 units Tambours
Overhead crane
Vacuum system Hibon vacuum pumps
2 x size 140
2 x size 50
Size press kitchen
Rewinder Made by A Celli
Bale width 3100 mm
Refurbished ca 2015 by Thiry Belgium
Speed ca 1500 m/min
Steam and condensate
system: Continuously updated
Starch preparation
Hydraulic unit
Continuously updated controls
Lot of spare parts, for every press roll min 1 spare roll included
Big assortment of felts
Control system: The currently installed control system is connect-ed with the still running part of the mill and not available.
Stock preparation: The stock preparation is not available. Currently we can provide a stock preparation line from an-other location.

European Fourdriner 2800 mm net width 200 t/day

Siebsaugkästen / Entwässerungskästen 4950 mm neuwertig

 

 

European Double wet suction box 4950 overall width 750 m/min

Paper machine 6900 mm

Second hand news print (can be converted into fluting) paper production machine

Gramages Range:48-51 gsm

Use of chemithermomechanical (CTMP) pulp –

Design speed: 900 m/min –

Production speed max.: 820 m/min

Production speed avarage: 650 m/min

Wire: Two wire (papriformer)

Wire Width: 7.500 mm

Web Width: 6.900 mm

Net web width (after rewinder): 6.840 mm

Basis weight (= % 2,5) : 48-51 g/m²

Moisture (# 0,5) : 7,5 %

Production day: 350 d/year

Production with (51 g/m2): 286 t/d

Paper machine production capacity (51 g/m2): 100.000 t/year

Accuray 1180 QCS year 1988 –

INCLUDING :

Jagenberg rewinder Winding Coil Diameter : 1.500 mm

Unwinder Coil Diameter : 2.000 mm

2 Main Motor,

Power of the per motor is 214 Kw.

Automatic brake and edge control system

15 Knives

Operating Speed: 2300 m/min

European Two wire 6900 mm 286 tpd