Papiermaschinen

Hauptbild Name Hersteller Typ Größe Kapazität

Tissue paper production line 74 t/day with stock preparation and rewinder

Used tissue paper production line:

Consisting of:

Stock preparation for virgin pulp

- Pulper

- Refiners 

- Screening

- Disc filter

 

Paper machine

Headbox: Single layer, year 1990 ies
Press section  Double (SPR + BPR), year 2000 ies
Yankee, year 2010 s
Max speed  1450 m/min

Vacuum system

 

Rewinder with 4 unwind stands

European 74 t/day

Used transformer board production line for sale

Used transformer board production line for sale:

videos are available on demand.

Scope of supply:

Cellulose pulp preparation line: consists of two hydro pulpers for disintegration of 10 m³each, tanks, pumps, refiners 2 units with powers of 315 kw each, centrifugal sorters, etc.

The sheet forming machine:  consists of two stainless steel pick-up cylindrical sieves and a forming cylinder. Diameter in length: 2000 mm x 3200 mm.

Sheets dimensions: 6300 mm x 3200 mm.

Press: equipped with 8 pressing cylinders, arranged horizontally, with a diameter of 690 mm and working at 320 hydraulic bar

 

Swiss company Bell 2500 t/year

Tissue paper manufacturing line 15 t/day with rewinder

Gebrauchte Tissuepapier Produktionslinie inklusive Stoffaufbereitung für Zellstoff sowie Umroller

European 2310 mm trim 15 t/d

Paper machine 2550 mm

machine width: 2550mm

Max. speed: 200 m/min

BW range: 30-400grs/m²

Supply voltage: 3 x 500 Volts

Steam pressure: 4 bar

Air pressure: 7 bar

Water pressure: 2 bar

Water consumption: 40 Lts/Kg

Steam consumption: 3.0 Kg/kg

PM only from headbox to pope-roll.

 

MACHINE DESCRIPTION

Has produced a wide range of products:
Fine papers, 60 to 220 GSM with watermark and deep colors. High quality board papers up to 400 GSM
Other specialty papers from 30 to 90 GSM

Production range is from 30 to 400 GSM running at 50 to 220 m/min.

Paper with at reel is 2550 mm max.

Capacity is up to 3500 Kg/h.

Main characteristics is its formation uniformity CM and MD, gradual drying rate both wet and steam dried.

GENERAL DESCRIPTION

FORMING SECTION WITH DANDY ROLL

It is a Fourdrinier type with removable table for wire change, cantilever couch roll, closed headbox for optimal flow rate at any speed and watermarking Dandy Roll.

PRESSES

Three 80 kg /cm2 presses, 2 lower felt and a 3rd upper felt, allowing good drying capacity and surface smoothing.

Water content after presses is about 50% below 120 GSM.

DRYING

Consist in a main battery of 18 driers of 1250 mm diameter, in 3 drive sections with drying felts on both sides.

Post drying after size press is done with 6 driers, 4 of 1000mm dia and 2 1250mm diameter in one drive section, with automatic paper moisture control.

All driers tested at 4 Bar, heated with steam at 3.7 Bars max.

All sections covered by a recovery heat hood that allows pocket ventilation at 90 degrees Celcius.

SIZE PRESS

Two rubber 350 mm diameter rolls working at 20 Kg/cm allows sizing with starch and latex.

CALENDER STACK

Küsters 400mm dia King roll, 2 intermediate 330mm dia rolls and un upper 400mm dia Queen roll that can be used as a one pass or three pass calender up to 80 Kg/cm.

MACHINE DRIVE

It is a line shaft with conical pulleys, pneumatic clutch and angular reducer for 11 sections. Motor drive is 300 Kw dc.

SECURITY PAPER MACHINE

  • ·  Deckle : 2,55m
  • ·  Max Speed : 220m/min
  • ·  Basis weight range : 40/400gsm
  • ·  Headbox : pressurized / Stainless steel built in 2003
  • ·  Fourdrinier with foils, 6 vacuum boxes, Couch Roll with vacuum
  • ·  2 vertical presses with bottom felt – max 80kg/cm
  • ·  1 vertical presses offset – max 80kg/cm
  • ·  18 Drying cylinder – Diameter 1,25 m – 3,7 ata steam pressure
  • ·  Inclined Size-Press – working pressure 20kg/cm
  • ·  6 Drying cylinder – Diameter 4×1,0m + 2×1,25 m – 3,7 ata steam pressure
  • ·  High efficiency hood
  • ·  Machine Calender – 3 NIPs – Kuster bottom roll
  • ·  Vertical Reel up (Pope
  • ·  ABB supervision & gauges for Moisture & basis weight control

 

  • Product portfolio
  • 1). security papers, like for checkbooks, fiscal stamps, minutes for notaries
  • 2.) papers for wine labels,
  • 3.)  bristol cardboard for various commercial applications, like posters, bookstore, 
  • 4.) papers with watermark, 
  •  
  • 4.) plasterboard

 

  • Operational Features: The very versátiles headbox with both option to run either with vacuum or with pressure between 0.5 abd 1.15 % of consistency and a forming table with a vacuum system, that let the operators to work with less or more water on the table…

 

  • It had a very flexible, multiple  vacuum system, where you could easaly regulate the amount of water to handled on the table…

 

  • Production Mix : ThePM was continuously switching from one grade to another,  between 40 and 330 gr/sqm of basisweight. 
2550mm 3,5 t/h

Corrugating Board Paper (or Kraft paper) Mill+ Stock Preparation

Paper: Kraft (or Corrugating Medium, Test Liner Paper)

Basis weight: 31-100 GSM (or 220GSM)

Maximum paper width: 6520 mm

Production capacity: 400 ton/day

Design speed: 1,110 m/min

Nominal speed: 400~800mm/min

Slight motion speed: 10~60mm/min

(At sequence, operation monitoring settings possible)

Leveling speed: 100~999.9m/min

(At sequence, operation monitoring settings possible)

Rate of change per second:

0.1~1m/min/sec (slow speed)

1~5m/min/sec (rapid speed)

Change time settings: 10%/200 seconds (10% change time can be set)

Coating in size press: max. 1g/m2 (double-side)

Reel winding length: 74m

Reel winding maximum diameter: 2600mm

The number of machine sections: 12 sections

The number of motors: 42units (Manufacturing year: 2004)

Manufacturing year of electric equipment: 2004

 

Metso / Beloit / Mitsubishi Twin wire (or four wires) 6520 mm 400 t/d

Langsieb-Papiermaschine 4200 mm

Gebrauchte corrugated medium Papermaschine:

Type: fourdrinier

Paper grade: corrugated medium

Trim width: 4200 mm

Speed: 600 m/min

Grammage: 90 - 220 gsm

Machine drive: sectional drive by DC motor and reducer

Equipped with size press

Location Asia, drive 60 HZ

 

Fourdrinier 4200 mm 550 t/d

Papiermaschine Fourdrinier 2500 mm

Gebrauchte Langsieb Papiermaschine

Antriebe 60 Hz! 

 

Trim width: 2500 mm

Working speed: 150 - 350 m/min

Design speed: 400 m/min

Capacity: 120 t/d

Basis weight: 90 - 215 gsm

Drive: sectional drive BYDC and AC motor, belt pulley and reducer

Fourdrinier 2500 mm 120 t/d

Kraftliner Karton Papiermaschine 2950 mm

 Kraftliner paper machine 2950 mm

Basis Weight: 170 g/m² - 500 g/m²

Machine speed: 120 m/min (200 g/m²)

Paper Width: 2,950 mm

Capacity: 100 tpd

      

2950 mm 100 tpd

Pappenmaschine 2850 mm

Grey millboard production machine


Grammage range: 1000 - 2000 GSM
Width: 2850 mm
Capacity: 36 t/day


Consisting of
Approach flow system:
1 Voith size 10 pressure screen
1 Finkh vibrating screen
1 Andritz Mixing pump


Board machine:
2 cylinder mould
Coutch roll


Forming section with:
Forming roll: 1500 mm diameter
Pre press roll: 350 mm diameter
Breast roll: 460 mm diameter
Complete with drive, spare rolls


General refurbishment: 1991
Refurbishment: year 2007, Renewing of cylinder mould with couch roll,
Installation of Siemens S7, Framing in stainless steel
Octopus distributor in stainless steel.
Table, working width 3.000 mm
Length: 6.000 mm


Table
Working width: 3.000 mm
Length: 7.000 mm
With guide roll and embossing calander


Table
Working width: 3.000 mm
Length: 5.500 mm


Length cutting unit
Working width: 4.00 mm
Length: 2.500 mm
With water jet cutting


Steam - Flat dryer
Made by: Schilde
Transport with chains
Working width: 4.800 mm
Dryer length: 18.000 mm
With ventilators
Refurbished: 2008


Table
Working width: 4.800 mm
Length: 3.000 mm
Refurbished: 2007


Gas Dryer
Heating power: 1.400 kW
Made by: Dornier
Working width: 4.00mm
Dryer length: 14.000 mm
With heat exchange and heat recovery
Year: 2007


Flat dryer
Hot air drying
Made by: BSH
Working width: 4.800 mm
Length: 25.000 mm
With 5 Drying chambers
Gas burner Ventilators
Heat recovery
Refurbished: 2008


Table
Length cutting device
Made by: Schohr
Year: 1973


2 Hydraulical layboys
 

European Cylinder mould 2850 mm 36 t/ 24 h

Papiermaschine, 200 tato, grafische Papiere, Beloit

Manufacturer:Beloit

Manufacturing year: 1970's 

GSM: 32-74g/m2

Production capacity: 200ton/day

Product: Printing Paper B,C,D / Information Paper/ Newspaper Paper

Design speed: 1100m/min

Operation speed: 945m/min

Beloit 200t/d