Verkaufsliste
| Hauptbild | Name | Hersteller | Typ | Größe | Kapazität |
|---|---|---|---|---|---|
1 verfügbar |
Vibrierendes Beschickungsband |
Carrier Europe | — | — | — |
1 verfügbar |
Pulp bale handling / feeding system for pulperPulp Bale handling / feeding system for pulper Capacity: 150 bales / hour (weight 250 Kg) 2 stack-pulp units: 2 bales horizontal, 4 bales vertical Moisture: 3-10% Stacks: Size: w:700-1000mm, h: 1200-2100mm, l: 1200-1800mm Weight: max. 2000 kg Single bales: Size: w:700-1000mm, h: 400-550mm, l: 600-900mm Weight: min.200kg - approx. 250 kg
|
— | — | — | — |
1 verfügbar |
Hydrapulper Kadant 57 m³Pulping plant made by Kadant with feeding belts Working volume: 57 m³ Gross volume ca 65 m³
|
Kadant / Lamort | Hydrapulper | 57 m³ working volume | — |
| — | Niedrigkonsitenzpulper 100 m³ mit Zuführband |
— | Low consitency Pulper | ca 100 m³ | — |
2 verfügbar |
Valmet Optifiner RF 1 mit Antriebsmotor |
Valmet | Optifiner | RF 1 | 5 - 150 t/day |
1 verfügbar |
Sortierer Lamort SP 300Used pressure screen Lamort SP 300 Output: 2600 l/min Production: 10 - 12 t/day Power requirement: 4 Kw |
Lamort | SP 300 | — | 2600 l/min |
| — | Used Yankee dryer, MG cylinder for paper machine |
European | — | 4200mm x 2250 mm net width | — |
1 verfügbar |
Centac-Compressor IngersollrandFlow rate: 40.8 m3/min Suction pressure: 0.98 bar Maximum pressure: 8 bar Intake air temperature: 35° Humidity: 60% Water temperature: 25° Water flow rate: 326 l/min Engine speed: 2975 rpm Engine power: 270 kW Weight: 4295 kg |
Ingersollrand | C40MX2 | — | — |
1 verfügbar |
2 colour offset press Heidelberg QM 46-22-colour offset press Maximum sheet size: 34 x 46 cm |
Heidelberg | QM 46-2 | — | — |
1 verfügbar |
Printing machine Heidelberg GTO ZP 5277 M revolutions Maximum sheet size: 36 x 52 cm AQUATRON dampening in 1995 16 optional numbering machines (up, down, vertical, horizontal: 4 of each) |
Heidelberg | GTO ZP 52 | — | — |
